Type-2 Fuzzy Inference System Research Articles

Rainfall Assessment Using Weighted Interval Type-2 Fuzzy Inference System

This study proposes an integrated model for assessing rainfall in Chennai using the Interval type-2 fuzzy reasoning technique and the Analytic Hierarchy Process (AHP). Interval Type-2 Fuzzy Inference System (IT2FIS) is employed to describe complex relationship between the rainfall variables and rainfall rate by considering individual weights of those variables through the aggregation of criteria weights using AHP. The suggested approach has an edge over its predecessors in terms of modeling the inter-personal and intra-personal uncertainty involved in rainfall rate classification. Finally, the developed rainfall model (RM) is applied on the historical dataset collected from Indian Meteorological Department (IMD). The actual data and the IT2FIS model’s performance are compared. Correlation coefficient ([Formula: see text]) and Bland–Altman Plot (BAP) have been used to evaluate the performance metrics of the proposed model. The outcome suggests that the AHP-IT2FIS model can accurately estimate rainfall over time, indicating its potential for long-term use.

Interval Type-2 Mutual Subsethood Cauchy Fuzzy Neural Inference System (IT2MSCFuNIS)

An interval type-2 (IT2) mutual subsethood Cauchy fuzzy neural inference system has been proposed in this paper. The network architecture consists of 3-layers with all connection weights being IT2 Cauchy fuzzy membership functions (CMFs). The crisp inputs to the system are fuzzified into IT2CMFs with fixed centers and uncertain spreads. The hidden layer represents the rule-based knowledge. The firing degree of the antecedent part of each rule at the hidden layer is computed by aggregating the product of the mutual subsethood similarity measures between the inputs and the connection weights. A volume defuzzification is used to compute the numeric output. A gradient descent back-propagation algorithm is used to train the model. The novelty of the proposed model is threefold. First, is enriching the theory of the mutual subsethood fuzzy neural models by adopting the Cauchy membership function (CMF) as another powerful fuzzy basis function (FBF) rather than the classical choice of Gaussian fuzzy membership functions (GMFs). Second, is the success of computing the mutual subsethood similarity measure between the IT2CMFs and all the model parameters’ updating equations in analytic closed-form formulas, not numerically or approximately. Third, is the ability to extract the type-1 (T1) mutual subsethood Cauchy fuzzy neural inference system (T1MSCFuNIS) with all its analytic closed-form formulas directly as a special case from the general formulas of IT2MSCFuNIS model. Such a novelty makes the proposed model a concrete and effective development of the theory of mutual subsethood fuzzy neural models. Both IT2MSCFuNIS and T1MSCFuNIS models have been tested using different examples from the domains of function approximation, classification, and prediction. The results ensure the efficacy of both models compared with other models reported in the literature.

Hybrid approach of type-2 fuzzy inference system and PSO in asthma disease

This research work presents a hybrid approach combining a type-2 fuzzy inference system with particle swarm optimization (PSO) to develop a type-2 fuzzy optimized inference system, specifically tailored for asthma patient data. Addressing the inherent uncertainty in medical diagnostics, this model enhances traditional type-1 fuzzy logic by incorporating ambiguity into linguistic variables and utilizing type-2 fuzzy if-then rules. The system is trained to minimize diagnostic error in asthma disease identification. Applied to a dataset comprising eight medical entities from asthma patients, the model demonstrates substantial accuracy improvements. Numerical computations validate the system, showing a decrease in error rate from 1.445 to 0.03, indicating a significant enhancement in diagnostic precision. These results underscore the potential of our model in medical diagnostic problems, providing a novel and effective tool for tackling the complexities of asthma diagnosis.

Interval Type-3 Fuzzy Inference System Design for Medical Classification Using Genetic Algorithms

An essential aspect of healthcare is receiving an appropriate and opportune disease diagnosis. In recent years, there has been enormous progress in combining artificial intelligence to help professionals perform these tasks. The design of interval Type-3 fuzzy inference systems (IT3FIS) for medical classification is proposed in this work. This work proposed a genetic algorithm (GA) for the IT3FIS design where the fuzzy inputs correspond to attributes relational to a particular disease. This optimization allows us to find some main fuzzy inference systems (FIS) parameters, such as membership function (MF) parameters and the fuzzy if-then rules. As a comparison against the proposed method, the results achieved in this work are compared with Type-1 fuzzy inference systems (T1FIS), Interval Type-2 fuzzy inference systems (IT2FIS), and General Type-2 fuzzy inference systems (GT2FIS) using medical datasets such as Haberman’s Survival, Cryotherapy, Immunotherapy, PIMA Indian Diabetes, Indian Liver, and Breast Cancer Coimbra dataset, which achieved 75.30, 87.13, 82.04, 77.76, 71.86, and 71.06, respectively. Also, cross-validation tests were performed. Instances established as design sets are used to design the fuzzy inference systems, the optimization technique seeks to reduce the classification error using this set, and finally, the testing set allows the validation of the real performance of the FIS.

Modeling of Fuzzy Systems Based on the Competitive Neural Network

This paper presents a method to dynamically model Type-1 fuzzy inference systems using a Competitive Neural Network. The aim is to exploit the potential of Competitive Neural Networks and fuzzy logic systems to generate an intelligent hybrid model with the ability to group and classify any dataset. The approach uses the Competitive Neural Network to cluster the dataset and the fuzzy model to perform the classification. It is important to note that the fuzzy inference system is generated automatically from the classes and centroids obtained with the Competitive Neural Network, namely, all the parameters of the membership functions are adapted according to the values of the input data. In the approach, two fuzzy inference systems, Sugeno and Mamdani, are proposed. Additionally, variations of these models are presented using three types of membership functions, including Trapezoidal, Triangular, and Gaussian functions. The proposed models are applied to three classification datasets: Wine, Iris, and Wisconsin Breast Cancer (WDBC). The simulations and results present higher classification accuracy when implementing the Sugeno fuzzy inference system compared to the Mamdani system, and in both models (Mamdani and Sugeno), better results are obtained when the Gaussian membership function is used.

An Experimental Private Small Hydropower Plant Investments Selection Classification System

Investment selection problems and models are crucial for humans, communities, and states. Private small hydroelectric power/ hydropower plant investments (PSHPPIs) selection problem is a unique one in those problems and models. Many available scientific methods can be implemented on this research topic. One methods group is type-2 Mamdani’s type fuzzy inference systems (FISs). This study presents an experimental one-node general type-2 4-zslices Mamdani’s type FIS model for PSHPPIs selection. There are 3 input variables (total estimated electricity generation: M1, total estimated cost: M2, change in the average runoff: M3), 1 output variable (O1: selected/unselected, selection classification of PSHPPIs), and 49 rules. M1 is designed in 5 triangular and trapezoidal general type-2 4-zslices fuzzy membership functions (MFs), M2 in 5 triangular and trapezoidal general type-2 4-zslices fuzzy MFs, M3 in 5 Gaussian type-2 4-zslices fuzzy MFs, and O1 in 2 Gaussian type-2 4-zslices fuzzy MFs. All modeling details are finalized by a human-expert decision process. JuzzyOnline V2.0, a browser-based platform of Juzzy (a Java-based library: Juzzy toolkit), is used for all FIS modeling and calculation activities. Five PSHPPI options assumed to be in their very early investment stages in Turkiye are evaluated in an experimental application. It is clear that an improved, tuned, and fine-tuned version of this model will help private investors to take more convenient/satisfying actions/decisions in a very short evaluation period in their PSHPPIs decision processes. An automatic investment selection classification system can be built in an appropriate development period after experiencing many methods and models. This study is one of the open-science humanoid robot, robot and platform development activities entitled Global Power Robots and Platforms: GPRP/GPRAP (Global Power Plants Developers: GP2D/G2PD/GPPD, Global Power Plants Engineers: GP2E/G2PE/ GPPE, Global Power Plants Owners: GP2O/G2PO/GPOO, Global Power Prediction Systems: GP2S/G2PS/GPPS), Global Profile Analyses Systems, and Global Social Network Analyses Systems.

A hybrid clustering-based type-2 adaptive neuro-fuzzy forecasting model for smart control systems

The practical applicability of smart control systems suffers from the existence of uncertainty in the physical parameters, sensor measurements and external excitations. Effective methods and its ease of implementation are required in the real-time active control strategies. To this end, in this research, we introduce an overlapping clusters and Multilayer Extreme Learning Machine (ML-ELM)-aided interval type-2 Takagi-Sugeno fuzzy inference system for vibration mitigation of smart structures. The combined Fuzzy C-Means (FCM) and imperialist competitive algorithm (ICA) with respect to degree of fuzzy overlap between clusters was utilized for characterizing the upper and lower membership functions forming the antecedent part. Furthermore, indeterminacy was modeled as footprint of uncertainty (FOU) and automatically formed based on statistical characteristics of soft clusters. The consequent parameters were adjusted by hybridization of ML-ELM and overlapping clusters, then the adaptivity was guaranteed. The predictive accuracy and generalization capability of the proposed method were demonstrated over the estimation of active control effort. Finally, to prove the practicability of the implemented framework, it was applied to four high-rise, mid-rise and low-rise benchmark building structures equipped with active mass damper (AMD), active tendon and active bracing system (ABS). The obtained results demonstrated the higher predictive accuracy and generalization ability of the presented data-driven control scheme compared to the other standard technical machine learning strategies. This practical guideline is easy to implement and automates control engineering tasks in real-time applications, solving one of the most challenging aspects of smart control systems.

Early prediction of diabetes diagnosis using hybrid classification techniques

<span lang="EN-US">Diabetes can be mentioned as one of the most lethal and constant sicknesses that may cause an arise in the glucose levels. Design and development of performance efficient diagnosis tool is important and plays a vigorous role in initial prediction of disease and help medical experts to start with suitable treatment or medication. The insulin produced by pancreases in the subject’s body will be affected leading to several dysfunctionalities to various body organs such as kidney, heart eyes and nervous system with their normal functionalities. Hence, preliminary stage detection with proper care and medication could reduce the risk of these problems. In the area of medicine to discover patient’s data as well as to attain a predictive model or a set of rules, classification techniques have been continuously used. This study helped diagnose diabetes by selecting three important artificial intelligence techniques namely the optimal decision tree algorithm model, Type-2 fuzzy expert system and adaptive neuro fuzzy inference system which is modified. In the present research work, a hybrid model is proposed in order to improve the classification prediction and accuracy. The Pima Indian diabetes dataset from machine learning repository dataset was used to carry out validation and predication of the model accuracy.</span>

T2RFIS: type-2 regression-based fuzzy inference system

This article discusses a novel type-2 fuzzy inference system with multiple variables in which no fuzzy rules are explicitly defined. By using a rule-free system, we avoid the serious disadvantage of rule-based systems, which are burdened with the curse of dimensionality. In the proposed system, Gaussian membership functions are used for its inputs, and linearly parameterized system functions are used to obtain its output. To obtain the system parameters, a genetic algorithm with multi-objective function is applied. In the presented method, the genetic algorithm is combined with a feature selection method and a regularized ridge regression. The objective functions consist of a pair in which one function is defined as the number of active features and the other as the validation error for regression models or the accuracy for classification models. In this way, the models are selected from the Pareto front considering some compromise between their quality and simplification. Compared to the author’s previous work on the regression-based fuzzy inference system, a new inference scheme with type-2 fuzzy sets has been proposed, and the quality has been improved compared to the system based on type-1 fuzzy sets. Four experiments involving the approximation of a function, the prediction of fuel consumption, the classification of breast tissue, and the prediction of concrete compressive strength confirmed the efficacy of the presented method.

An ultra-low power fully-programmable analog general purpose type-2 fuzzy inference system

Neuro-fuzzy systems is a soft computing technique for developing intelligent systems that solve complex real-world problems in a way that closely resembles human reasoning. In this work, a novel ultra-low power pure analog integrated type-2 fuzzy inference system architecture is proposed. The system consists of Gaussian membership function and MIN/MAX operator circuits and a center of gravity defuzzification block. The architecture is easily scalable in the design-level, regarding various system’s hyperparameters, resulting in a general-purpose system that can be modified to suit a wide variety of applications. Moreover, the system is fully programmable and electronically tunable even post-fabrication. Finally, a novel fuzzy classifier is implemented in a 90nm CMOS process using the Cadence IC Suite for the electrical and physical design utilizing the proposed architecture. The classifier is evaluated on the breast cancer Wisconsin (original) dataset and is compared with the equivalent software model and other analog classifiers. Post-layout simulation results confirm the proper operation of the design while demonstrating the optimal combination of ultra-low power and high accuracy performance relative to the other analog classifiers.

Type-2 fuzzy-logic based control of photovoltaic-hydrogen production systems

Green hydrogen will play an important role for sustainable development, it can be considered as a promising solution for energy transition. In this paper, direct and indirect-coupled configuration of hydrogen production system consisted of Photovoltaic (PV) source and electrolyzer stack are investigated. A study on power loss and efficiency in PV-electrolyzer system is conducted for both cases. Optimal matching conditions in directly coupled hydrogen system can be achieved by modifying the configuration of series/parallel cells in electrolyzer stack or PV generator. However, the energy transfer can be improved by incorporating a buck converter between PV string and electrolyzer stack. In this article, the type-2 fuzzy inference system is proposed to control the operating point of PV string by adjusting the duty cycle of control signal of buck converter. A comparison with classical MPPT methods is carried out in order to verify the efficiency of suggested technique. It has been found that the indirect-coupled hydrogen system can achieve higher energy transfer rate by ensuring continuous extracting of maximum power of PV source under various operating conditions. The obtained results, under Matlab/Simulink environment, demonstrated a satisfactory performance of type-2 fuzzy logic controller in both transient and permanent regimes. We obtain a minimal power loss value (less than 8.1%) in directly-coupled hydrogen production system, in addition a satisfactory value of efficiency (more than 93%) has been obtained.

Financial Performance Assessment by a Type-2 Fuzzy Logic Approach

Any company must constantly innovate if they want to maintain its market share in the present cutthroat and unstable industry. Innovation has a big influence on consumer behavior, yet it goes against the principles of sustainability. The issue of sustainability has become crucial to their company’s growth. In order to evaluate a business firm’s sustainability performance statistically, a new and effective fuzzy logic tool is created. Evolution and assessment are performed by a novel interval type-2 fuzzy logic inference system. The judgment of the inference system is carried out on the basis of type-2 fuzzy logic (T2FL), principal component analysis (PCA), and statistical data analysis. The main input variables include corporate environmental performance (CEP) and corporate financial performance (CFP). The suggested approach can effectively examine a corporation’s sustainable performance, according to experimental findings. A unique approach that makes use of language variables and if-then logic to assist quantitative business sustainability events is the link between CEP and CFP. The recommended test will provide senior administrative leaders with useful information to supervise natural concerns correctly and gauge their commitment to company success.

Coal Structure Prediction Based on Type-2 Fuzzy Inference System for Multi-Attribute Fusion: A Case Study in South Hengling Block, Qinshui Basin, China

The accurate prediction of coal structure is important to guide the exploration and development of coal reservoirs. Most prediction models are interpreted for a single sensitive coal seam, and the selection of sensitive parameters is correlated with the coal structure, but they ignore the interactions between different attributes. Part of it introduces the concept of the geological strength index (GSI) of coal rocks in order to achieve a multi-element macroscopic description and quantitative characterization of coal structure; however, the determination of coal structure involves some uncertainties among the properties of coal, such as lithology, gas content and tectonic fracture, due to their complex nature. Fuzzy inference systems provide a knowledge discovery process to handle uncertainty. The study shows that a type-2 fuzzy inference system (T2-FIS) with multi-attribute fusion is used to effectively fuse pre-stack and post-stack seismic inversion reservoir parameters and azimuthal seismic attribute parameters in order to produce more accurate prediction results for the Hengling block in the Shanxi area. The fuzzy set rules generated in this paper can provide a more reliable prediction of coal structure in the GSI system. The proposed system has been tested on various datasets and the results show that it is capable of providing reliable and high-quality coal structure predictions.

A New Perspective for Multivariate Time Series Decision Making through a Nested Computational Approach Using Type-2 Fuzzy Integration

The integration of key indicators from the results of the analysis of time series represents a constant challenge within organizations; this could be mainly due to the need to establish the belonging of each indicator within a process, geographic region or category. This paper thus illustrates how both primary and secondary indicators are relevant for decision making, and why they need to be integrated by making new final fuzzy indicators. Thus, our proposal consists of a type-2 fuzzy integration of multivariate time series, such as OECD country risk classification, inflation, population and gross national income (GNI) by using multiple type-1 fuzzy inference systems to perform time series classification tasks. Our contribution consists of the proposal to integrate multiple nested type-1 fuzzy inference systems using a type-2 fuzzy integration. Simulation results show the advantages of using the proposed method for the fuzzy classification of multiple time series. This is done in order so the user can have tools that allow them to understand the environment and generate comparative analyses of multiple information sources, and finally use it during the process prior to decision making considering the main advantage of modeling the inherent uncertainty.

Learning Type-2 Fuzzy Logic for Factor Graph Based-Robust Pose Estimation With Multi-Sensor Fusion

Although a wide variety of high-performance state estimation techniques have been introduced recently, the robustness and extension to actual conditions of the estimation systems have been challenging. This paper presents a robust adaptive state estimation framework based on the Type-2 fuzzy inference system and factor graph optimization for autonomous mobile robots. We use the hybrid solution to connect the advantages of the tightly and loosely coupled technique by providing an inertial sensor and other extrinsic sensors such as LiDARs and cameras. In order to tackle the uncertainty input covariance and sensor failures problems, a learnable observation model is introduced by joining the Type-2 FIS and factor graph optimization. In particular, the use of Type-2 Takagi-Sugeno FIS can learn the uncertainty by using particle swarm optimization before adding the observation model to the factor graph. The proposed design consists of four parts: sensor odometry, up-sampling, FIS based-learning observation model, and factor graph-based smoothing. We evaluate our system by using a mobile robot platform equipped with a sensor setup of multiple stereo cameras, an IMU, and a LiDAR sensor. We imitate the LiDAR odometry in structure environments without needing other bulky motion capture systems to learn the observation model of the visual-inertial estimators. The experimental results are deployed in real-world environments to present the accuracy and robustness of the algorithm.

Data preprocessing strategy in constructing convolutional neural network classifier based on constrained particle swarm optimization with fuzzy penalty function

Convolutional neural networks (CNNs) have attracted increasing attention in recent years because of their powerful abilities to extract and represent spatial/temporal information. However, for general data, its features are assumed to have weak or no correlation, and directly applying CNN to classify such data could result in poor classification performance. To address this problem, a combined technique of original data representation method of fuzzy penalty function-based constrained particle swarm optimization (FCPSO) and CNN, so-called FCPSO-CNN is designed to effectively solve the classification problems for generic dataset and applied to recognize (classify) black plastic wastes in recycling problems. In more detail, CPSO is introduced to optimize feature reordering matrix under constraints and the construction of this matrix is driven by fitness function of CNN that quantifies classification performance. The Mamdani type fuzzy inference system (FIS) is employed to realize the fuzzy penalty function (FPF) which is utilized to realize the constrained problems of CPSO as well as alleviate the issues of the original penalty function method suffering from the lack of robustness. Experimental results demonstrate that FCPSO-CNN achieves the best classification accuracy on 13 out of 17 datasets; the statistical analysis also confirms the superiority of FCPSO-CNN. An interesting point is worth to mention that some feature reordering matrices in the infeasible space come with better classification accuracy. It has been found that the proposed method results in more accurate solution than one-dimensional CNN, random reordering feature-based CNN and some well-known classifiers (e.g., Naive Bayes, Multilayer perceptron, Support vector machine).

Shadowed Type-2 Fuzzy Sets in Dynamic Parameter Adaption in Cuckoo Search and Flower Pollination Algorithms for Optimal Design of Fuzzy Fault-Tolerant Controllers

In recent, various metaheuristic algorithms have shown significant results in control engineering problems; moreover, fuzzy sets (FSs) and theories were frequently used for dynamic parameter adaption in metaheuristic algorithms. The primary reason for this is that fuzzy inference system (FISs) can be designed using human knowledge, allowing for intelligent dynamic adaptations of metaheuristic parameters. To accomplish these tasks, we proposed shadowed type-2 fuzzy inference systems (ST2FISs) for two metaheuristic algorithms, namely cuckoo search (CS) and flower pollination (FP). Furthermore, with the advent of shadowed type-2 fuzzy logic, the abilities of uncertainty handling offer an appealing improved performance for dynamic parameter adaptation in metaheuristic methods; moreover, the use of ST2FISs has been shown in recent works to provide better results than type-1 fuzzy inference systems (T1FISs). As a result, ST2FISs are proposed for adjusting the Lèvy flight (P) and switching probability (P′) parameters in the original cuckoo search (CS) and flower pollination (FP) algorithms, respectively. Our approach investigated trapezoidal types of membership functions (MFs), such as ST2FSs. The proposed method was used to optimize the precursors and implications of a two-tank non-interacting conical frustum tank level (TTNCFTL) process using an interval type-2 fuzzy controller (IT2FLC). To ensure that the implementation is efficient compared with the original CS and FP algorithms, simulation results were obtained without and then with uncertainty in the main actuator (CV1) and system component (leak) at the bottom of frustum tank two of the TTNCFLT process. In addition, the statistical z-test and non-parametric Friedman test are performed to analyze and deliver the findings for the best metaheuristic algorithm. The reported findings highlight the benefits of employing this approach over traditional general type-2 fuzzy inference systems since we get superior performance in the majority of cases while using minimal computational resources.

Type-1 and type-2 fuzzy logic-based space vector modulation for two-level inverter fed induction motor

Two-level inverter control with type-1 and type-2 fuzzy logic-based space vector pulse-width modulation (PWM) method for induction motor drive (IMD) is presented in this paper. A new sampling time independent strategy with type-1 and type-2 fuzzy based methods are used in generating three phase duty ratios which are directly obtained without mathematical equations. The conventional method of space vector modulation (SVM) produces the duty ratios for the inverter which are sampling time dependent. However, in type-1 and type-2 fuzzy based space vector PWM algorithms, the three phases duty ratios generated are sampling time independent and with a new integrated dead-time insertion in SVM itself, can be implemented practically for any switching frequency. As the rule-base for Mamdani non-singleton interval type-1 and type-2 fuzzy inference systems are designed manually, with the expert knowledge of conventional space vector PWM, the duty ratios of the inverter are generated such that the performance of the IMD is improved. The simulation studies for aforementioned cases is performed in matrix laboratory (MATLAB) and experimental validation for the proposed space vector PWM algorithms is validated using real-time sacraetheologiae magister (STM) hardware with STM32F429I Cortex M4 processor for a 1 hp IMD.

Type-2 fuzzy logic applications designed for active parameter adaptation in metaheuristic algorithm for fuzzy fault-tolerant controller

PurposeIn recent times, fuzzy logic is gaining more and more attention, and this is because of the capability of understanding the functioning of the system as per human knowledge-based system. The main contribution of the work is dynamically adapting the important parameters throughout the execution of the flower pollination algorithm (FPA) using concepts of fuzzy logic. By adapting the main parameters of the metaheuristics, the performance and accuracy of the metaheuristic have been improving in a varied range of applications.Design/methodology/approachThe fuzzy logic-based parameter adaptation in the FPA is proposed. In addition, type-2 fuzzy logic is used to design fuzzy inference system for dynamic parameter adaptation in metaheuristics, which can help in eliminating uncertainty and hence offers an attractive improvement in dynamic parameter adaption in metaheuristic method, and, in reality, the effectiveness of the interval type-2 fuzzy inference system (IT2 FIS) has shown to provide improved results as matched to type-1 fuzzy inference system (T1 FIS) in some latest work.FindingsOne case study is considered for testing the proposed approach in a fault tolerant control problem without faults and with partial loss of effectiveness of main actuator fault with abrupt and incipient nature. For comparison between the type-1 fuzzy FPA and interval type-2 fuzzy FPA is presented using statistical analysis which validates the advantages of the interval type-2 fuzzy FPA. The statistical Z-test is presented for comparison of efficiency between two fuzzy variants of the FPA optimization method.Originality/valueThe main contribution of the work is a dynamical adaptation of the important parameters throughout the execution of the flower pollination optimization algorithm using concepts of type-2 fuzzy logic. By adapting the main parameters of the metaheuristics, the performance and accuracy of the metaheuristic have been improving in a varied range of applications.

A comparative study of multiband mamdani fuzzy classification methods for west of Iraq satellite image

In our paper, performance of four fuzzy membership function generation methods was studied. These methods were studied in the context of implementing Mamdani fuzzy classification on a set of satellite images for western Iraqi territory. The first method generate triangulate membership functions using mean, minimum (min) and maximum (max) of histogram attribute values (AV), while peak and standard deviation (STD) of these AV were used in the second. On the other hand, in the third and fourth methods, Gaussian membership functions are generated using same mentioned values in the first and second method respectively. The goal was to generate a Mamdani type fuzzy inference system the membership function (MF) of each fuzzy set and implementing the AV of western Iraqi territory training data sets. A pixel-by-pixel comparison of each method with traditional maximum likelihood method (ML) was made on data sets comprising six bands of satellite imagery of the western Iraqi region taken by the Landsat-5 satellite. Simulation results of these performance comparisons singled out that the method using Gaussian MFs together with peak and STD of the AV as the best achiever with a similarity of 83.16 percent for band (3) of the studied area.